Welcome: Hongkong Bishop Technology Co., Limited

English | Español      

Home > Xiaomi Eco > 70Mai > 70mai Jump Starter

  • 70mai Jump Starter
  • 70mai Jump Starter
  • 70mai Jump Starter
  • 70mai Jump Starter
70mai Jump Starter70mai Jump Starter70mai Jump Starter70mai Jump Starter

70mai Jump Starter

  • Category: 70Mai
  • Our 70mai lithium jump starter is designed for 12V vehicles with up to 5.0L petrol or 3.0L diesel engines.
  • Our jump starter is very smart and multifunctional, built in a 5V/2.4A USB charging port and LED flashlight. USB output charging port can be used to charge mobile phone, tablet, camera and so on, it's
  • 4 small led battery indicator lights show the remaining battery, smooth surface without leaving fingerprints, fire-proof and waterproof material design
  • Temperature protection design provide full protection to ensure the safety of usage from overheating. Eight protection smart clamp: Short-circuit protection, Over-voltage protection, Over-current prot
  • Product description:Xiaomi 70mai Jump Starter 70Mai car jump starter Battery Power Bank car starter Auto Buster Car Emergency Booster Engine start
  • Contact Us

How to use the 70mai Jump Starter? Using the device as a 12V jump starter

1. Connect the jump starter to the device. Ensure that the indicator on the battery clips are off.

2. Connect the battery clips correctly to the positive and negative ends of the car battery. The red clip should be connected to the positive (+) end, while the black clip should be connected to the negative (-) end. Then, follow the instructions below:
  • When the green light is turned on, the connection is correct and the battery can be jump started.
  • When the red light is turned on and a buzzer sound can be heard, the clips are connected to the wrong ends. Connect the clips correctly and make sure the green light is turned on before jump starting the battery.
  • When the green light is flickering and a buzzer sound can be heard, the voltage is too low. Press the boost button and wait till the green light stops flickering. Jump start the battery within 30 seconds.
  • When both the green and red lights are not turned on and no buzzer sound can be heard, the battery may be completed damaged. Ensure that the clips are connected to the correct ends. Press the boost button and wait till thegreen light is turned on. Jump start the battery within 30 seconds.

3. After the car is jump started, remove the battery clips.

Independent lighting switch,you can change it into lighting ,Strobe lighting and SOS signal light by one switch.

In full charged status,you can use highlight lighting continuously for 48 hours.Help you handle emergency situation freely when equipped your car with it.

DO Anti-reverse interface design,can be recognized automatically when battery clip is being  reversed,avoiding wrong operation.

An overall easy-to-use jump starter that's ideal for any newbie. Connect your portable jump starter, start your car, disconnect the jump starter, and then leave. Don't wait for someone to save you, take care of it yourself and leave.

Basically the same size as a portable power bank for smartphones

Cellphone will always have 4% battery power when you need them most. A good reason to keep a power pack jump starter in your car is that most will have a USB port on them that you can use to charge your phone. You can also use it to charge a tablet and anything else that gets it's charge through a USB chord.

Basic Parameters

Dimensions: 163×87×27mm

Capacity: 11100mAh(41.07Wh)

Output: 5V / 2.4A,12V jump starter port

Input: 5V / 2A

Charging time: ≤5.5hours

Jump start current: 250A

Peak current: 600A

Operating temperature: -20℃~55℃

Charging temperature: 0~55℃